Q: How could I enable 3D feature on ASRock Vision 3D and ION3D system?(2011/11/1) A: Different monitor/TV/content/playback software may have different settings.
We use below for example:
3D TV: Samsung UA46C7000WM 46"
Play back software: Power DVD10 v10.0.2025.52
Play back content: Step UP 3D blu-ray
1. Please follow below steps to setup under OS.
A. Please install all drivers on SCD before following steps in this setup guide.
B. Please right click on desktop, and enter NVIDIA Control Panel.
C. Select "Setup Stereoscopic 3D task" in NVIDIA Control Panel, and check to "Enable Stereoscopic 3D"
D. If it's the first time for you to setup 3D feature, the system may lead you to run Setup Wizard. Please follow the instruction and finish the Setup Wizard.
E. After finishing the Setup Wizard, please enter Display > Change Resolution, set the resolution to "HD, 3D" with proper solution and "Refresh rate".
We set it as "1080p" and 24Hz during our tests.
F. Click "Apply" to save the changes.
2. Please follow below steps to setup your PowerDVD10
A. Click on the arrow right next to the "3D" icon on PowerDVD10 to start 3D Display Configuration.
B. Set the proper type of your monitor / TV in Display Device. As shown in picture below, we select 120Hz Time-sequential 3D LCD for example.
* Note: Please note that different monitor/TV/content may have different settings; please check user manuals of your monitor / TV/content for further details.
C. Then you can play the 3D content.
메뉴
